BanG Dream! RiNG Membership Card Case

ℹ️Introduction

I didn't want to buy a membership card case for ¥20 on Taobao, so I made my own.
The acrylic sheet was custom-made on Taobao (here)(I didn't receive any money from the seller) 10 pieces for ¥10 with free shipping, 2mm thickness.

You can download the STL/CAD files on the PC to download the cutting files for custom-made acrylic sheets.

The two-tone color in the picture is achieved by adding a pause and color change at the 27th layer, using PETG white + transparent green filaments. (A friend said it looks like an iMac G3)

Considering electricity costs, materials, time, and the matcha parfait I had to buy to calm myself down after being frustrated by the printer (a necessary emotional balm), the cost easily reaches ¥50.

Using a verified model to print, the cost can be reduced to approximately ¥3/piece. If possible, please boost me to help me recoup some of the costs. This will encourage me to create more models like this.

⚙️You will also need the following parts to assemble

1. Four M2*6 screws (no nuts required)
2. Arknights Pass lanyard (It seems to be compatible with ordinary lanyards, but the magic stickers sold on the market are relatively thick and difficult to thread through. If it doesn't work, you can reduce the number of screw holes and use a bead chain instead.)

💰Commercial Restrictions

This model is strictly prohibited for any commercial use. The extra acrylic sheets are limited to personal non-commercial use and can be used to give to friends or make more to store other documents.