Decorated Spiral Egg Holder - Free 3D Print Model

Search models, users, collections, and posts

Mirkosa

Household>Decor

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.6mm nozzle, 0.2mm layer, 2 walls, 0% infill

Designer

7.1 h

1 plate

5.0(39)

0.2mm layer, 3 walls, 15% infill

6.7 h

1 plate

4.8(68)

Open in Bambu Studio

Boost

1052

2473

140

2.9 k

1.3 k

Released

Description

Holds about a dozen or so large eggs. 2 versions included, one with and one without holes in the center hexagons. The one with holes can be harder to print and may require you to slow down your speeds.

Update: 10/11/2024

I am changing the license to a “Standard Digital License” on this to participate in the new Makerworld Exclusive Program. However you can still feel free to upload your own remixes to Makerworld under the old license terms. Off-site distribution is no longer an option though due to the requirements of the program.

The previous license:

Creative Commons Attribution-Share Alike

Comment & Rating (140)

@Corgus

Print Profile

0.2mm layer, 3 walls, 15% infill

Perfect! I also printed a chicken file to go on the top and my whole family loves it!

@MrRobotVN

good idea

@Veetwin

Do you have a link to the chicken file? I love that!

(Edited)

@Sofaking_Val

I would love that also!

@kjtowns

Print Profile

0.6mm nozzle, 0.2mm layer, 2 walls, 0% infill

I have chickens so I thought this would be a great print for me to use when I clean my eggs. It works great, but it is very hard to get the bottom egg from the spiral because the top is so close. Other than that no issues and no issues printing. Thanks for sharing!!!

@Snieres3d

Print Profile

0.6mm nozzle, 0.2mm layer, 2 walls, 0% infill

printed with .4 nozzle and had no issues.

@NMRED24

did you use support ?

@Snieres3d

Replying to @NMRED24 :

Been awhile since i printed this, but no i dont think i did.

@user_1877438239

It turned out perfect!!

Show original

@FlavorFrank

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Simply superb and easy to print

Show original

@Mirkosa

Love the idea of flowers/plants in the middle, nice!

@DaninoRey

Nice design, love it

The designer has replied

@Mirkosa

Thanks, love the orange!

@cletusbojangles

Print Profile

0.2mm layer, 3 walls, 15% infill

This is a long print but turned out really cool. I only took off one star because a cutaway at the bottom would be nice to pull the eggs from there.

@LuizGamaFilho

Print Profile

0.6mm nozzle, 0.2mm layer, 2 walls, 0% infill

Very beautiful I made it using leftover filament

Show original

@user_1978426867

Print Profile

0.2mm layer, 3 walls, 15% infill

useful and printed well, fits 16 large eggs

@ZenithTea

this is brilliant! thank you. though maybe my eggs are too small as they sometimes fall off the sides. any chance I could request a handle at the top for transport?

The designer has replied

@Mirkosa

That's a good idea, but I don't know if could be done with the design as is. At least not securely, unless it were glued in. I've thought about remaking this to be better now that I have more experience. If I do that'll be on the list of things to incorporate for sure! Probably a threaded top for attachments.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Twisty Mini Dragon Egg Fidget

NUKDDD

52.2 k

10.4 k

Dragon Spiral Egg

3Dudes

5.4 k

1.6 k

Spiral Egg

Bearded Printer

6.1 k

1.8 k

Spiral Cone Fidget

rangido

38.5 k

3.4 k