8x4.5 RC propeller - Free 3D Print Model

Search models, users, collections, and posts

Max_Thebeef

Hobby & DIY>RC

IP Report

Print Profile(1)

All

P2S

X1 Carbon

A1 mini

H2D

P1P

H2C

X1E

H2S

P1S

H2D Pro

X2D

A2L

0.12mm layer, 6 walls, 60% infill

Designer

1.1 h

1 plate

4.3(16)

Open in Bambu Studio

Boost

121

277

757

372

Released

Description

An 8x4.5 propeller for your RC plane. A light sanding can be necessary after removing supports.

Comment & Rating (27)

@UAVnerd13

Print Profile

0.12mm layer, 6 walls, 60% infill

good printed my at 0.08mm

@60017520

Print Profile

0.12mm layer, 6 walls, 60% infill

the propeller was reversed

The profile uploader has replied

@user_505875224

Propellers spin counter-clockwise when viewed from the front, so it is in fact not reversed.

@60017520

Replying to @user_505875224 :

well it was in a clockwise setup when I printed

@60017520

Replying to @user_505875224 :

well it was opposite of every other propeller I used,

@moontiger3d

Boosted

Print Profile

0.12mm layer, 6 walls, 60% infill

LOVE IT. I rotated/duped this in an octagonal configuration and got plenty of thrust out of my puny 3000rpm 6V N20 motor. Perfect thrust for the drone I’m building. Also the angle is perfect; I have tried different configurations and this one is optimal. 10/10. Five stars.

The profile uploader has replied

@user_505875224

8 blades is impressive!

@Maestro33

is it safetly ? , what filament are u using ? , can we use that for rc electrical planes ?

The designer has replied

@user_505875224

I used regular PLA and have tested it to very high speed without issue, works great on RC planes.

@Willenynonky

Print Profile

0.12mm layer, 6 walls, 60% infill

@planesaredabest

does it make more noise than a ordinary prop or does it sound smooth 🤔

@Willenynonky

Replying to @planesaredabest :

no its very smooth sounds like an ordinary prop

@planesaredabest

Replying to @Willenynonky :

i'll use it as a spare then

@marten.

Print Profile

0.12mm layer, 6 walls, 60% infill

I recommend printing the supports with a different material, otherwise they will be difficult or impossible to remove

Show original

@user_4234149351

Print Profile

0.12mm layer, 6 walls, 60% infill

bien

@AlwinCB

Print Profile

0.12mm layer, 6 walls, 60% infill

don't know, maybe I'm doing something wrong, but I can't print it correctly

Show original

@RojoRider

I wanted to build a more stable prop out of PETG-CF... Conclusion: with PETG CF it strings and is unusable. I'm sure there's a setting that would work, but I haven't found it yet :D

Show original

@isagumus1

Reynold must have turned upside down inside his grave, man.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.