SprayPal – Wall-Mounted Bottle Hook

SprayPal is a practical 3D-printed wall hook designed to hold trigger spray bottles. It helps organize your workspace, save space, and keep cleaning products neatly stored and easily accessible. Available in two sizes to fit most common bottle types.

The hook is easy to mount using two screws and holds the bottle securely by its trigger, allowing the bottle to hang safely and accessibly.

Available Sizes:

• V1 Wider:        height 71 mm / depth 41 mm / outer width 36 mm / inner width 30 mm
• V2 Wider:        height 39 mm / depth 41 mm /outer width 36 mm / inner width 30 mm
• V1 Narrower:  height 60.3 mm / depth 34.8 mm /outer width 31.6 mm / inner width 25.5 mm
• V2 Narrower:  height  39 mm / depth 34.8 mm / outer width 31.6 mm / inner width 25.5 mm

The holes are made for standard 3.5 mm and 4 mm wood screws.

Alternatively, on smooth and hard surfaces (like inside cabinets, tiles, or laminated boards), you can use strong double-sided tape – no drilling required.

Recommended Material:

• Indoor use: PLA / PETG
• Outdoor use: PETG (or a more durable material (like ASA or ABS) is recommended for better weather resistance.)

Why is it practical?

• Keeps spray bottles neatly organized.
• Saves space and improves accessibility.
• Ideal for workshops, garages, sheds, or household use.

No support needed.

!!! Make sure the print speed and temperature and cooling are set correctly for your printer and the filament you are using. And the build plate should be clean. !!!