3/8" Threaded Rod – Negative STL Insert

This STL is meant to be used as a negative insert in your models to create a 3/8" threaded rod hole.
Do not print the rod itself PLEASE :)
Scaled to 105% for tolerance. Rod height = 80 mm.
Works great for mounting your prints onto standard gooseneck arms or mic mounts.

Its very simple to use: 

1. Download this model
2. Open your project
3. Right click on your model you want to add the hole to
4. Add negative part
5. Load this 3/8 thread rod stl
6. Position and print!
7. Enjoy!