Doctor Who 12th Sonic Screwdriver Prop - Free 3D Print Model

Search models, users, collections, and posts

Micro Center- Inland Filament

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

X1 Carbon

X1E

H2S

A1 mini

P2S

P1S

P1P

H2D

H2D Pro

H2C

X2D

A2L

0.08mm layer, 2 walls, 15% infill (multi-plate, all parts)

7.5 h

4 plates

4.7(22)

Open in Bambu Studio

Boost

399

960

508

196

Released

Description

12th Doctor Who 12th Sonic Screwdriver

Inland Filament Used:

Printer Settings:

Nozzle Temp: 215°
Bed Temp: 60°
Organic Supports Used Everywhere
15% Infill
Print Time: 5 Hours
Assembly Time: 10 Minutes

Model:

Some pieces require glue, but most are assembled with snap fits

STL designed by studleyavocado

Comment & Rating (32)

@bill.m.davis

Boosted

I don't watch Dr. Who, but I had a friend request a sonic screw driver after seeing the light-up sabers I have been making. So I was pleased when I found this design. This is a complex build with no instructions that I found. I printed these pieces a few times with different orientations to find the proper position and use as few supports as I could. I had to use the photos to figure out how to glue it together. Not to bad of a puzzle, and really cool when together, but it does seem fragile due to its size.

(Edited)

@Estre

Print Profile

0.08mm layer, 2 walls, 15% infill (multi-plate, all parts)

I really liked the design thank you we painted it

Show original

@mbcraft

Boosted

Love it ! You should make a stand for it like the one in the TARDIS ;)

(Edited)

@Ennax_3d

Boosted

perfect this was a really good print. It's only a bummer that it is not to real scale of the real sonic and I don't now how much % you should print if you want it to scale