Star Trek computer screen – Hueforge

Star trek enterprise computer screen 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE THE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.12mm and the Actual Thickness is 3.04mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #dfa241 PLA Kingroon Orange  Transmission Distance: 4.6
    #6632c8 PLA Kingroon purple  Transmission Distance: 2
    #ffffff PLA sunlu white  Transmission Distance: 6.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #12 (1.04mm) swap to Orange
    At layer #23 (1.92mm) swap to purple
    At layer #29 (2.4mm) swap to white for the rest.