Desk Clamped Miniature Paint Shaker

Collect parts needed to build the body of the clamped shaker. This includes 7x 608 bearings, these can be metal ones or printed ones. Metal ones will work best. Some great printed bearings.

• https://makerworld.com/en/models/476685-608-ball-bearing-6mm-softair-bbs-no-wobble?from=search#profileId-387698
• https://makerworld.com/en/models/473167-608z-6000z-roller-bearing-v2?from=search#profileId-383170
• https://makerworld.com/en/models/816988-608-bearing-print-in-place?from=search#profileId-759363
• You can also download these excellent knurled M8 Bolts:
  
  https://makerworld.com/en/models/398427-fully-printable-knurled-screws-m8?from=search#profileId-299943

Connect axles to gears & bearings:

Assemble slider, axle & disk assemblies:

Assemble Handle using bearings & M8 bolt.

Secure large bevel gear using flat nut.

Assemble slider and axle assemblies in one body half.

Assemble threaded Pusher.

Bolt Halves together, plastic printed M8 bolts can be used, or metal ones:

ALTERNATIVE BUILD for screwdriver or powertool:

Close body halves using M8 bolts (metal ones can be used if ye has them)

3x Bottle Holder (vertical):

3x Bottle Holder (horizontal):

UNIVERSAL HOLDER

Print Plates explanation