ATX Motherboard Mount (HSW)

This motherboard mount is fully ATX, Micro ATX and Mini ATC compliant with built-in standoffs. I have also included multiple M4 holes positioned for the HSW M4 connector.

I have cut the tray into 3 parts, suitable for print beds of 235mm. Use the parts you need and connect them with M4 bolts.

For the standoffs, I would recommend using M4 heat inserts. there is plenty of space in the standoff to allow for various lengths of typical motherboard mounting screws.

I printed this in AnkerMake PLA+ (along with my HSW), which is plenty strong and heat-resistant enough. Every motherboard is different, please use an amount of HSW connectors and standoffs that you feel are suitable for your board. (I used them all for added strength)

A completely original model that uses HSW attachments for mounting