Bombo de Murga (Murga drum)
Print Profile(1)
Description
Hello, this is a special Drum used in Argentina for the Murga, it sounds for real!
you can customize the logo, (i put a default murga logo) and you can also customize colors by choose yours
Mounting Istructions
print the plate 1 (x2)
print plate 2 (x1)
print plate 3 (x1)
you also need
6x M5x133mm bolts with round head (or you can cut yourself a 5mm threaded rod at 13cm
6x self locking nuts (12x if you cut the rod)
12x washers inner 5,4mm out 15mm
1x couple of platillos
1 push spring
you also need a m5 or m6 bolt with nuts and washers for mounting the plate on top, but measures depends on what spring and plate (platillo)
you use
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)