Print Profile(1)
Description
Gardena Foam Buddy
Ideally suited for preparing and applying a foam mixture
- for Gardena connection
- tested for 0.5l PET bottles (Coca-Cola bottle)
For optimal adhesion to the print bed, use the .3mf preset if possible
What you will need:
- PETG of your choice (PLA might also work)
1x Gardena sealing ring to prevent dripping, for example:
https://makerworld.com/de/models/1349631-gardena-sealing-o-ring?from=search#profileId-1392014
or
1x hose section with 4mm inner diameter, for example:
- 1x 0.5l PET bottle of your choice
- Concentrate or mixture of your choice
Tip:
At the end of the spraying process, briefly hold your finger over the nozzle
This briefly rinses back into the bottle and prevents clogging
due to dried residues of the concentrate
Boost Me (for free)
If you like my design, I would be very grateful for a like or boost :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)