One-handed Desk Lamp

I needed a lamp for my workbench.

Here is the result, my most elaborate project to date.

A clamp for mounting to the tabletop can be inserted into the lamp base.

The lamp is adjustable without the need for additional locking screws.

I achieved this using a total of four springs in the joints.

I used the following springs (6x10x1):

https://www.amazon.de/dp/B0C77W2GDT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

One spring is required per joint.

GU10 lamp holder:

https://www.amazon.de/dp/B07QS1R7WB?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Screw set:

https://www.amazon.de/dp/B0D7VNGDYG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Switch:

https://www.amazon.de/dp/B07CZHPM6Y?ref=ppx_yo2ov_dt_b_fed_asin_title

Power cable:

https://www.amazon.de/dp/B0CCV5T49L?ref=ppx_yo2ov_dt_b_fed_asin_title

Should there be any problems, please leave a comment.

Positive comments are, of course, also welcome.

IMPORTANT NOTE: All electrical work must be carried out exclusively by trained professionals. Therefore, no instructions for connecting the lamp are provided here.