Usagi's Chicken Clock.

This is a clock inspired by the one you will see in Sailor Moon.

PLEASE READ:

Most of the parts are separate but you will need an AMS unit to print some, I did my best to make it separate so I'm sure it will work even if you want to print them and paint by hand a little. 

Some parts will need glue like the bigger ones, but try to assemble first.

Some smaller parts are a little tight like black dots on the clock and the eyes, but if you push them in they will fit I promise, I left them that way because it was too small to glue.

Just let them cool down a little and then remove the brim, it will come off easier.

The green filament I used has been discontinued by BambuLab, theres one on the site but its not the same , use one you feel you like the most.

I used BambuLab's Clock components, and these do not have alarm unfortunately. I also tried really hard to design a hand for the seconds but the room for it is so so tight that wasnt able to print it ... So I designed the clock with hands for minutes and hours only.

That's it.

Don't forget to comment and rate. It really helps. Thank you.