MicroLab Tray Expansions

Created a double-ended 3.5" HDD Tray, cable pass-through plate, a tray to fit/hold an HD Homerun Flex, a tray for a myPassport portable drive, and a modified solid end cap with antenna mount hole. Solid cap can be modified in slicer to 0 top layers and 0 bottom layers to be made perforated; I would recommend adjusting to at least 6 wall loops for proper strength if you do this.

The HDD tray cannot be added to a MicroLab while fully assembled. I think it goes without saying, but top or bottom cap and every tray in between the points you want to mount must be removed first. Remove the chosen cap very carefully or you could snap off a piece of a column. (Ask me how I know~)

~Shared at the request, and with the blessing of CB4D~