Portable Band Saw Stand
Print Profile(2)
Bill of Materials
Description
This portable band saw table and stand should be compatible with most saws on the market but it is designed with the Harbor Freight Bauer and Hercules branded portable band saws in mind.
I recommend you print with PLA Plus or PLA Tough ideally or PETG Plus with 100% infill.
I have added brims to the print profile to prevent warping and the print from lifting off from the build plate. Feel free to turn off the brims if you feel your printer setup won't cause warping.
Also, you will need a scrap piece of plywood or 2x4s glued together as a base to screw the bottom portion into.
BOM:
#12x1" Round Head Wood Screws 4x
5/16 Washers 4x
#12-24 TPI Machine Screws 2x
#12-24 TPI Nuts 2x
¾" Wide Velco Strap for Trigger 1x
Power Foot Switch 1x
The hardware can be obtained from homedepot, harborfreight or amazon.com. See the complete image for assembly. It should be pretty strait forward. Comment below with questions.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)