Tie Fighter Kit - Star Wars - Free 3D Print Model

Search models, users, collections, and posts

Bene

Toys & Games>Characters

IP Report

Print Profile(2)

All

X1 Carbon

H2D

P1P

P1S

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.1mm layer, 3 walls, 10% infill

Designer

26 h

4 plates

4.8(42)

A1 mini - 0.2mm layer, 3 walls, 10% infill

23.2 h

8 plates

4.8(19)

Open in Bambu Studio

Boost

1431

3552

2.4 k

479

Released

Description

This is my colored TIE-Fighter kit without AMS

If you like a version for AMS, check out this:

https://makerworld.com/de/models/893746-tie-fighter-star-wars-imperial-tie-fighter#profileId-889365

First of all print of course all the parts

Then star assembling the different parts, step by step.

Have Fun :)

Comment & Rating (80)

@bateroloco

I printed it and the result is magnificent, thank you very much

Show original

@niiiick

Nice work! I was tempted to remix it since I found the wings are best sliced in half and printed flat which then means you could make the wings just a frame and fit the black inserts. My son is very happy with it so thanks!

@LynxCub

Print Profile

0.1mm layer, 3 walls, 10% infill

had a slight support issue over adhering to the gun ports. Beyond that, turned out great!

@Dr.Hossa265

Print Profile

A1 mini - 0.2mm layer, 3 walls, 10% infill

Perfekt

@BasilK

Print Profile

0.1mm layer, 3 walls, 10% infill

This has been the MOST difficult print in my 6 years of 3d printing. The black parts print with no issues. I attempted to print the wings and body and it failed due to poor adhesion of the supports. I separated the body from the wings and printed separately. Had to print the body 4 more times before getting a print where the supports didn’t come off the build plate. I printed the wings three times before I could get both wing. as each wing takes 8hr to printed I have put in over 60hr. I have no issues with this build plate with any other model.

(Edited)

@LTC_J9

love it

@ShaneThePyeGuy

Print Profile

0.1mm layer, 3 walls, 10% infill

awesome print, great detail!

@maxmini

Boosted

Excellent result

Show original

@garu.rar

Boosted

Print Profile

0.1mm layer, 3 walls, 10% infill

I had trouble with supports for printing the ship's cockpit, I had to change the part's position and the support type But it turned out amazing, a very good model Make more Star Wars ships

Show original

@KACHME

Boosted

Print Profile

A1 mini - 0.2mm layer, 3 walls, 10% infill

Came out really well!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.