Christmas - Bethlehem portal hueforge
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA JAYO GRIS OSCURO Transmission Distance: 2.8
PLA WINKLE GRIS CLARO Transmission Distance: 3.2
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to GRIS OSCURO
At layer #11 (0.96mm) swap to GRIS CLARO
At layer #17 (1.44mm) swap to White for the rest.
☕ ¿Disfrutando del diseño?
Si encontraste útil este diseño y te gustaría apoyar mi trabajo, ¡no dudes en invitarme a un café!
Enjoying the design?
If you found this design useful and would like to support my work, feel free to buy me a coffee!
https://buymeacoffee.com/davinchi20
☕ ¿Disfrutando del diseño?
Si encontraste útil este diseño y te gustaría apoyar mi trabajo, ¡no dudes en invitarme a un café!
Enjoying the design?
If you found this design useful and would like to support my work, feel free to buy me a coffee!
https://buymeacoffee.com/davinchi20
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)