The Doors coasters

10 coasters featuring The Doors

The coasters have a diameter of 100 mm and a height of 2.24 mm.

Filaments Used:
- BambuLab PLA Basic Black
- BambuLab PLA Basic Blue Gray

- BambuLab PLA Basic White 
- Polymaker Panchroma PLA Matte Fossil Grey
 

These files were created using HueForge. If you wish to print them separately or print only one coaster, swap the filaments at the following heights:
1. For Nenea1 and Nenea4 coasters:

Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #17 (1.44mm) swap to White for the rest.

2. For Nenea3 and Nenea5 coasters:

Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.
 

3. For Nenea6 and Nenea9 coasters:

Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

4. For Nenea2 coaster:

Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Grey
    At layer #15 (1.28mm) swap to White for the rest.

5. For Nenea7 coaster:

Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #18 (1.52mm) swap to White for the rest.
 

6. For Nenea8 coaster:

Start with Black
    At layer #7 (0.64mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Grey
    At layer #22 (1.84mm) swap to White for the rest.

7. For Nenea10 coaster:

Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #22 (1.84mm) swap to White for the rest.