Gridfinity 2x2 for Canon EFS 18-55 Lense

Update: 2025-05-19
I added a 1mm wide gap to the cutout to allow for air flow. I did not update the photos.

This goes with my other Gridfinity box/bin for the Canon EOS Rebel T7 - This Gridfinity box cutout is for the stock lenses, EFS 18-55 - I couldn't find a model that fit what I wanted.

The 3MF file includes two plates, one without text and the other includes text. If you're using the 3MF file you'll see the print settings are adjusted, Please Note: If you use the Bambu Handy app these settings will be stripped. 

If you'd like to use the STL file and use the default settings:

Use all the default settings for 0.28mm Extra Draft  except for Strength, change the Sparse Infill pattern to Support Cubic this will reduce the total filament to 41.28g and cut the time down to 57m (compared to Grid: 46.56g at 1h) - If you want even more filament saving change the infill to Lightning for 33.63g. 

I used https://gridfinity.bouwens.co/ to generate the Gridfinity Box, it allows for solid boxes to be exported as a STEP file.