Doctore Who: Bad Wolf Tardis Hueforge
Print Profile(1)
Description
Instructions
Print with layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You can scale the X and Y axis but DO NOT scale the Z axis of any hueforge
Filaments Used
PLA+ Sunlu Black
PLA BambuLab Blue
PLA BambuLab Marine Blue
PLA BambuLab Ice Blue
PLA BambuLab Jade White
Swap Instructions
start with Black
at 1.72mm switch to Blue
at 2.12 switch to Marine Blue
at 2.68 switch to Ice Blue
at 3.24 switch to Jade White for the rest
All photos are of an actual print of my hueforge design. Use the same filament and colors and you can expect the same results. Make sure your print plate is clean for good adhesion. I like to put brims on my hueforges to make sure they don't lift or warp. If you have any issues with the print, feel free to shoot me a message.
If you like this print, give me a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)