Chinese stick magic trick
Print Profile(1)
Description
Boost Me (for free)
A set of “chinese sticks” magic trick.
The set is completely 3d printed, and works by a weight (I use a M17 nut) is dragging the string, as you tilt the tube, giving the illusion that you're pulling it from the other stick.
The caps are threaded and can easily be screwed on / off the sticks.
I reccomend using a string with low friction, or add a heavier weight.
The sticks are made with a support that easily snaps off. I've included the STL file without the support aswell
Assembly
- Put a string through the one hole, and just tie a knot on both sides of the tube,
The other string is put through the other hole, and in one end connected to the ring and the other end connected to the weight.
2. The bottom part (the 2 caps with holes) can be connected as shown, which gives you the opportunity to let the audience cut the string (which has no effect on the trick)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)