Intex pump opener

works nice. maybe ad little ledge so the print won't slide over de cap

Perfect, thanks.

This must be for a Type A or C filter. We have a Type B filter and it is way too small for our filter. Wish there were measurements in the description. I opened the file in studio and trusted the measurements that slicer gave me and then measured my pump. Thought it was ok and printed. Printed on A1 with PLA. Printed flawlessly. Just not designed for my pump and no room on the build plate to scale up. Super bummed as I thought I would be able to clean the filter without needing help from the husband. Overall great object and great concept. Edit: Wrench has an inside diameter of 6 inches or 153 mm.

do you happen to have the stl for the pump's rotating ring, the one you are loosening in the photo with the opener you designed

Re-printed one in ABS for the new season. re-sized to 101% and now fits much better than my previous print at 100%

Fits perfectly, printed in ASA, very stable 👍🏻

great part, will test it on my pool pump in spring

it is a bit to tight. need to use a lot of force to get it on. maybe print at 101/102% might fix it

Does anyone have the file for the Pump Collar? Ours is missing and now I’m trying not to lose all of our water.

Works well