Super fun to fly! 2-inch FPV cinewhoop - Free 3D Print Model

Search models, users, collections, and posts

BobJun

Hobby & DIY>RC

IP Report

GIF

Print Profile(1)

All

H2C

H2D

P2S

H2S

H2D Pro

X2D

A2L

2-inch cinewhoop

Designer

2.1 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

190

325

264

Released

Description

Content has been automatically translated.

Show original

2-inch Cinewhoop

The frame structure has undergone extensive testing and is now exceptionally stable in flight

Recommended frame printing materials are ABS or PETG, with PP recommended for the rings, virtually indestructible

Recommend TPU for the camera mount

Specifications: F411aio flight controller

The receiver used is a built-in ceramic antenna type, mounted at the rear of the frame

Requires a 14mm camera

Motors: 1104

Propellers: 2023

Recommended 3S 500-600mAh battery

Required hardware accessories:

M2x10 aluminum standoffs

M1.4x6 screws

M2x10 screws

M2x6 screws

M2x20 screws

This creation required significant effort; resale without my explicit permission is prohibited

Optimization suggestions for this frame are welcome in the comments section

Comment & Rating (17)

@D3MBOYZ

I will post all link to this s if get 3 likes

@Joshyy_333

Its Great, but it didn't fit my FC and my Motor Screws were to short, so I had to Chainge a fiew things on the Frame. Can I upload the File to This post to add it for someone to recreate? I used PLA+ and TPU for it, seams really good but I haven't chrashed it yet. Components are: 1103, 11 000kV motors from BetaFpv BLITZ Whoop AIO F411 from Iflight ELRS Nano Receaver from BetaFpv Zeus VTX from Banggood C03 cammera from BetaFpv