Printed M3 Plug to glue in
Remixed by
Boost
41
43
14
Print Profile(1)
0.2mm layer, 2 walls, 15% infill, PLA matte
Designer
17 min
1 plate
Open in Bambu Studio
Boost
41
43
14
1
207
169
Released
Description
A little M3 Plug I designed, because I had no M3 Screws for the Recaro Handy Stand.
There are bigger and smaller diameter, depending on how big the holes in the seat are.
I printed it on 50% print speed with open door and lid
Comment & Rating (14)
All
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
really great! thxs
1
Reply
is it possible to print with the A1 mini?
The designer has replied
0
Reply
should be, but can not test it
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
Strength Issue:used silk to add some contrast and more than half the plugs were not well rounded.
The designer has replied
0
Reply
hi, that is why I named the print profile PLA matte to prevent such issues 🤔
PLA silk has other parameters than PLA matte 🫤
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, PLA matte
Bed Adhesion Issue
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld