Extension house

You can extend the “Gerda” garden shed with this extension or simply use it as a shelter

Easy to assemble, print the floor and roof, and select the desired walls

Again, there's a choice:

1. Walls with a smooth structure
2.  Walls with a wooden structure

As usual, I've given you the option within the set to choose whether you need side pins for add-ons. Print the one you require

You will find various pin holes on the base plate and corresponding ones in the roof. This allows you to position the walls as you wish

For the climbing plants, you can use the original yellow Playmobil pins or print the included pins and glue everything together

You can also duplicate the pins and glue them in place to replace the original yellow Playmobil pins

However, you will need at least 8 - maximum 14 original yellow Playmobil pins

I wish you a lot of fun assembling it

Note: The name is only used to identify and describe the model and is not intended to infringe any property rights or trademark rights. These are not original Playmobil parts - they only serve as spare parts or extensions

I chose the color:

Base: Overture Brown PLA
Wall wood texture: Tinmorry PETG-Eco-Apricot (If not available look for Bone White)
Smooth wall: Tinmorry PETG-Eco-Ivory white
Frame: Tinmorry PETG-Eco-Black
Roof: PETG Grey from Sunlu
Add on: Tinmorry PETG-Eco-Green

Update: The roof was updated because pin holes were missing here

German:

With this annex house, you can extend the 'Gerda' garden shed or simply use it as a canopy

Easy to assemble, print the floor and roof, and choose the desired walls

Again, there's a choice:

1. Walls with a smooth structure
2.  Walls with a wooden structure

As usual, within the set, I've left you the choice of whether you need side pins for add-ons. Print the necessary one

On the base plate and correspondingly in the roof, you will find various pin holes. This allows you to position the walls freely as you wish

For the climbing plants, you can use original yellow Playmobil pins or print the included pins and glue everything together

You can also duplicate the pins and glue them in place to replace the original yellow Playmobil pins

However, you will need at least 8 - maximum 14 original yellow Playmobil pins

I wish you a lot of fun assembling it
 

Note: The name is only used to identify and describe the model and is not intended to infringe any property rights or trademark rights. These are not original Playmobil parts - they only serve as spare parts or extensions

I chose the color:

Base: Overture Brown PLA
Wall wood texture: Tinmorry PETG-Eco-Apricot (If not available look for Bone White)
Smooth wall: Tinmorry PETG-Eco-Ivory white
Frame: Tinmorry PETG-Eco-Black
Roof: PETG Grey from Sunlu
Add on: Tinmorry PETG-Eco-Green

Update: The roof was updated because pin holes were missing here