Search models, users, collections, and posts
Engwe LE20 Footrest
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 50% infill
Designer
4.3 h
1 plate
Open in Bambu Studio
Boost
4
7
1
0
9
2
Released
Bill of Materials
List other parts
- M4x30mm screw x 4:
- M4 nuts x 4:
- Washers x 8:
- Angle bracket (optional, read the description) x 2: the distance between the holes center is 15 mm, the distance between the hole center and the top of the bracket is 34 mm
- Small wood screw (optional, read the description) x 4:
Description
Hello everyone,
this is a footrest for the Engwe LE20 cargo bike.
It fits the screw holes in the bike frame.
I tried different printing setups but the one in the picture are made in PETG with a .4 nozzle, .20 mm layer height, 50% infill and 4 wall loops and with this setting it looks like it wouldn't brake under the weight of a person foot, but just to be sure i added 2 angle brackets I've found at my local hardware store. There are 2 small holes below the platform to screw the bracket (I used 4 small wood screws, approx 2mm in diameter and 10mm long)
Again, I think the brackets are optional, but I wasn't sure that the footrest would not bend and warp in the hot summers days, so… be aware!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)