Adjustable Power Supply Enclosure sk90

The DP decoy can be directly fixed with hot melt adhesive. The entire model requires no supports; even an A1 mini can print all parts in a single print. The adjustable power supply module doesn't need to be the same as mine; any similarly sized module will work. These adjustable power supply modules are quite uniform in size; the differences between those on the market are negligible. The dimensions are approximately 79mm in length and 45mm in width. This model has a one or two millimeter tolerance. When printing with PETG, you don't need to adjust the shrinkage rate or anything like that. The model in my picture is made with PETG. The required materials are all shown in the images above.