Inclinometer ATmega328, customz, schematics, firmw

An inclinometer based on an MPU-6050 and an ATmega328P.

Part list:

• 2 x 10uF polarized capacitor
• 2 x 22pF ceramic capacitor
• 1 x 100nF ceramic capacitor
• 2 x red LED
• 2 x yellow LED
• 1 x green LED
• 1 x 0.96" OLED screen, SSD1306
• 1 x 6-pole pin header
• 1 x 8-pole pin header
• 5 x 10k ohm resistor
• 5 x 220 ohm resistor
• 5 x 5mm PCB micro switch
• 1 x GY-521 module (MPU-6050)
• 1 x AMS1117-5.0 regulator
• 1 x ATmega328P MCU
• 1 x 16MHz crystal
• 4 x 3mm threaded insert
• 4 x M3x10 screw
• 1 x 9V battery connector with cables

You will also need some hardware to program the MCU.

Code, schematics etc. is available at https://github.com/jonsag/ardInclinometer.

Work in progress: waiting for PCBs and parts!

This is a development of my thing at https://www.thingiverse.com/thing:4706425.
This one is smaller and more usable.