Print Profile(1)
Description
Boost Me (for free)
Support us by giving a Boost! Your support helps us grow and keeps us inspired to create even more. Thank you!
Traditional Slovenian Wind Rattle - KLOPOTEC
A nearly forgotten craft brought back to life fully 3D printed.
A klopotec is a traditional wooden wind-driven device used in Slovenian vineyards to deter birds from damaging grapes or any kind of seeds. It consists of several components, each crafted from specific types of wood to produce a distinctive sound.
Authentic reproduction of the original vineyard klopotec.
No glue needed – all parts can be 3D printed (included in print profile).
All parts designed to fit A1, P1S, X1C, H2D.
Produces a real clatter sound – not just for display.
- Stolček (Block): Holds the axle; typically made from hardwood like chestnut, oak, or ash.
- Kvaka (Axle): A rotating shaft with holes to attach hammers; drives the motion of the device.
- Kladivčki (Hammers): Hammers that strike the board to create sound.
- Zvočna deska (Sound Board): The surface that hammers strike; commonly crafted from chestnut or cherry wood.
- Viličice (Little Forks): Hold the hammers in place.
- Rep (Tail): A bundle of twigs or leaves (often oak or pine) that helps orient the klopotec to the wind.
- Vetrnica (Sail): The wind-catching blades, usually made from poplar or fir; the number of blades varies by region.
Assembly Instructions Note:
Refer to the images below for guidance.
Each screw is marked with the number of identical parts and where they belong.
The pin that connects the sail (vane) to the axle is also clearly indicated.
Two short strings are needed for the sound board. After tying the knots and attaching the sound board to the block, it should hang approximately 25 mm below the mounting pin on the block.
If you want to print this model for outdoor use, we recommend using PETG or a less resistant material to UV and temperatures.
── Commercial Use ──
This model is for personal use only. You are welcome to print it for yourself or as a gift, but selling the digital file or any modifications of the file is not permitted, nor is selling physical prints of any of the design. A commercial license is available through our Patreon: https://patreon.com/MakerPair or you can subscribe to our Commercial License here on MakerWorld:
Membership
Subscribe to a Commercial License to sell physical prints of our models!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)