Nintendo Switch Screen Mount - JoyCon Controller
Print Profile(1)
Bill of Materials
Description
PLEASE READ ME !!!
Firstly I would like to say quick thank you for checking out my model, so thank you!
Please note most of my models are made in Nomad Sculpt by hand and are my own renditions (Fan Art) unless stated otherwise.
Model info:
Information.
Game in pictureis Rush Rally 3
I designed this mount purely to create a steering wheel setup on the original switch controller (one for the JoyCons)which works the same as the ones pixel2 created at https://www.thingiverse.com/thing:3049220 , I used his design and remixed it for the steering wheel which fits perfectly around this mount.
The steering wheel is available as a separate download on my designs.
The mount requires an M4 screw and nut as seen in the picture and it is advised the screw head is filled in to prevent scratching I just filled it with super glue as the screw needs to be glued into the inside of the frame anyway.
I will be adding a version that doesn't require the screw as you can get the screen off without separating the parts its just a bit of a squeeze hence the two individual pieces.
Please be nice with feedback and I look forward to reading thoughts and comments, Enjoy…
Post-Printing
Dont forget if printing the wheel on my other profile you need a 608 bearing
Boost Me (for free)
Please like, share, follow and BOOST, doing this allows creators such as myself to keep on making, Designing 3D models not only takes a substantial amount of time but also takes lots of material when test printing and causes extra wear and tear on our machines. BOOSTS are FREE and may not mean much to you but to us they are valuable and realy do help, so if you can please do :)
TIPS
Print using most types of PLA for best results.
Always allow build plate and print to cool down before removing.
Please ensure a clean print bed, when models dont adhere to a build plate its usually user error.
Please as always remove supports with care
Use sprue cutters to help remove supports
If you accidentaly break something save fillament and use some CA glue instead of throwing a project out and reprinting.
Remember this is a hobby! Have fun, be kind and support your favourite designers with likes, follows and boosts
Once again thank you for taking the time to view and hopefully print this model.
Additional info:
Any BOMs (non printable parts/ bills of material) will be attatched below.
Thank you for viewing my model :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)