Differential Gear
Print Profile(1)
Description
Functional Differential Gear – completely 3D-printable
This differential gear, which I developed, consists exclusively of 3D-printed parts and is fully functional. (Ball bearings should ideally be used)
It can be assembled without additional material – all axles are pressed into the bevel gears and hold stably through frictional engagement. (Adhesive for reinforcement can of course be used)
Two versions of the frame are available:
- Frame with bearing mount: Enables the use of ball bearings (16 x 5 x 5 mm) for more efficient running.
- Frame without bearings: With a 0.2 mm tolerance for a snug fit of the axles directly in the printed part.
All components can be printed separately and then assembled without tools. Assembly is somewhat tricky, but should still be manageable.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)