Dollar Coin Tube - Free 3D Print Model

Search models, users, collections, and posts

RobertW

Household>Other House Models

IP Report

Print Profile(4)

All

A1 mini

H2D Pro

P1P

X1 Carbon

H2S

P1S

X1E

P2S

H2C

H2D

X2D

A2L

Dollar Tube 0.2mm layer, 2 walls, 15% infill

Designer

52 min

1 plate

4.8(27)

Dollar Tube with extra clerance

Designer

1.1 h

1 plate

5.0(6)

Simple Case 0.2mm layer, 2 walls, 15% infill

Designer

44 min

1 plate

4.0(3)

Simple Case with extra clerance

Designer

54 min

1 plate

4.5(2)

Open in Bambu Studio

Boost

121

253

613

460

Released

Description

A coin tube to hold 25 dollar coins. There are two models, one with simple sides, and one with some cutouts to give it some style.

I have added a version of each with extra clearance, if the lid is too tight you can print the lid from the extra clearance model, the tubes are the same so you can reuse that part.

Comment & Rating (55)

@TwoLegit

Print Profile

Dollar Tube 0.2mm layer, 2 walls, 15% infill

Printed with no issues

(Edited)

The profile uploader has replied

@RobertW

Why only three stars then?

(Edited)

@TwoLegit

Replying to @RobertW :

If the print shows unsuccessful, you can only rate is 1-3 stars. I'd rate it 5 stars if I could. I'll see if I can reprint it, but scale it up to 1oz silver round size, and then rerate it

@TwoLegit

Replying to @RobertW :

Fixed. Sorry, I needed a few more points to get my gift card and it would only let me do 3 stars since it thinks the print was unsuccessful. I was able to reprint it (I just scaled it for some 1oz bullion so I had a use for it) and it let me edit it and put 5

@GASilverHunter

Print Profile

Dollar Tube 0.2mm layer, 2 walls, 15% infill

Nice Design, but I did have to sand down the inside of the lid and the outer lip of the tube to actually make the top work. The first time I printed this I did not sand it and I struggled to get the top on... then I couldn't get it off. Litterally had to get two pairs of pliers to pull the two ends apart. A little 220 grit sand paper and the tubes work great. Perhaps it was the type of PLA I was using, but its something you need to know about the design. I only printed the decorative one.

The profile uploader has replied

@RobertW

I finely got around to uploading a model with extra clearance in the lid. If you want to try it out you should only need to print the lid as the tub is the same. Let me know if you do and if it works better. Thanks.

@jack19347920

Print Profile

Dollar Tube 0.2mm layer, 2 walls, 15% infill

cap is a little too snug but still works

@m37man

Have you made this for other coins? These work great.

The designer has replied

@RobertW

I have not.

@Kronic3D

Replying to @RobertW :

do you care if i add a print profile for quarters and such?

@exregnar

would be sweet

@JTG_THE_MLO

Print Profile

Simple Case 0.2mm layer, 2 walls, 15% infill

VERY tight fit. could do with making the outer diameter of the male end a mil smaller.

The profile uploader has replied

@RobertW

Thanks, for the feedback, I will add one with some extra clearance, I think it depends on your filament, as mine printed with a perfect fit.

@RobertW

I added an extra model and profile with extra clearance for the lid. You should be able to just print the lid as the tube has not changed. Let me know if that works better for you. Thanks.

@3DprintsRme

Print Profile

Dollar Tube 0.2mm layer, 2 walls, 15% infill

Super Nice!!!

The profile uploader has replied

@RobertW

Thanks.

@Kirk2626

Print Profile

Dollar Tube with extra clerance

perfect print ty

The profile uploader has replied

@RobertW

Glad you found it useful. Thanks.

@user_2598443535

Print Profile

Dollar Tube 0.2mm layer, 2 walls, 15% infill

nice tubes

(Edited)

@user_3998988719

Print Profile

Simple Case 0.2mm layer, 2 walls, 15% infill

Excellent design

(Edited)

@dusman

Print Profile

Dollar Tube 0.2mm layer, 2 walls, 15% infill

tight fit but prints well

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.