Magic Falling Rings

Whether as a visual magic trick, a captivating fidget gadget, or a small mind-bending toy for in-between moments – the Magic Falling Rings unite magic, dexterity, and relaxation in one stylish object.

The chain is available in four variations that differ in length and number of rings: 14 rings, 24 rings, 32 rings, 40 rings. Thus, it is printable on any 3D printer. In addition, multiple chains can be connected to each other using two connectors, allowing for any desired extension.

All rings are arranged on the print bed at a 45-degree angle, so no support structures are needed. However, a brim around the first layer is recommended for better bed adhesion. This can be easily and quickly removed afterwards. After that, all rings should be able to move freely (however, if some are stuck together, they should be easy to separate).

The individual rings have a diameter of 15 mm. If necessary, however, the chain should also be easily scalable to the desired size in the slicer. Alternatively, I would also gladly create another model with larger rings on request ;)

Besides the chains and the connector, there is also a printable key ring so you can always have your chain with you.

Have you become curious about how many Magic Falling Rings are possible on one chain at maximum? Then quickly print your own – or even several – and if you like, share your achieved length with us in the chat. Maybe even with a photo ;)