AALIYAH HUEFORGE
Print Profile(1)
Description
Project: aaliyah tommy.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 158.2x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to Dark Brown
At layer #16 (1.36mm) swap to Latte Brown
At layer #19 (1.6mm) swap to Silver
At layer #21 (1.76mm) swap to Ice Blue
At layer #23 (1.92mm) swap to Jade White for the rest.
POUR CEUX QUI N ON QU UN SEUL AMS
PAUSE LIGNE15
ROUGE-LATTE
NOIR-BLANC
GRIS-SILVER
PAUSE LIGNE20
DARK-BLEU ICE
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)