Self-Watering Seed Starting Kit NOSUPPORTS

This cultivation kit can be printed completely WITHOUT supports and consists of a self-watering system for nine plants (ideal for Jiffy pellets), including a float (indicating the water level in the reservoir), a mini watering can, a tool for making seed holes, a small shovel for seeds or soil, nine labels, and nine seedling supports.

The smaller pots are ideally suited for Jiffy pellets—simply place them inside, fill the reservoir with water, and wait. The height and width simplify the later removal of the Jiffy pellets. However, it can also be used with the small pots with soil or coconut substrate.

All parts can and should be printed without supports; only with the pots, a single layer/line may be loosely printed, but this does not affect the appearance or stability. Simply peel off the loose part and you're done.

The float (level indicator) reliably and quickly indicates whether water is in the reservoir or needs to be refilled.

The watering can is intentionally designed with a tight tolerance to ensure watertightness.
First, attach the lid to the handle, secure it with the ring (press firmly!), then attach the handle including the lid to the water reservoir and secure it again with the ring. Finally, carefully but firmly turn the water spout into the water reservoir until it seals with the inside.

To open the watering can, gently press the handle on the lid; the lid will pop open.

You can easily label the small signs with a fine marker pen.

The seedling supports have a pointed end for easy insertion.

I hope you have a lot of fun with the cultivation kit I designed with care and love.
I would be very happy about every like, comment, or even boost!!