Kobra S1 Exo Magneto
Print Profile(1)
Bill of Materials
Description
I had a lot of requests to make a rear cover for the Kobra S1. While making this, I was seeing some users having trouble with the plastic tabs, both on the front and rear of the OEM and 3D-printed ones. I thought of a way to eliminate this by adding magnets.
The magnet's width is 4mm wide and 2 mm thick. I will provide a link to the magnets I purchased from Amazon. They are cheap, strong, and come in a pack of 400 (4 different sizes, 100 each). While mounting the magnets, please take note of the orientation so you don't find yourself printing multiple. I also recommend adding a small dab of CA glue to fully secure the magnets in place. I used a Q-tip and dabbed the inside of the hole and then inserted magnets.
WARNING!!! I ABSOLUTELY RECOMMEND PRINTING THE REAR COVER IN PETG DUE TO THE TEMPS IT IS AROUND.
I have printed the front cover in PLA before and have had no issues with any warping. In this photo, both the front and rear are printed in PETG-CF.
Please let me know of any issues with this, and I will try to fix them as fast as possible. Please make sure "Detect Thin Wall" and supports are used.
Amazon Link - https://www.amazon.com/dp/B0CDLF9K2Z?ref=ppx_pop_mob_ap_share&th=1
Boost Me (for free)
Like my work and wish to see more? A simple boost goes along way and inspires creators to continue creating for the community.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)