"Zip Tie Buddy" 3/16" Brake Line Clamp Asst'd Set

This one goes out special request to Jason Ford ( @volkdent on IG). How did I not think of making a size for 3/16" brake lines!? Here you have 1, 2, & 3 line clamps, and now I need to go back and replumb the brakes on the Mustang with these great little clamps. 

About “Zip-Tie Buddy”:

I'm that guy that uses too many zip ties. So I developed “Zip Tie Buddy” as a way to not only make your zip tie installations look more “clean”, but also to keep your wires, cables, hoses, etc routed more securely, and ultimately give a more professional looking installation any time you use them. “Zip Tie Buddy” is a 2 piece cable clamp that secures with a single standard zip tie. “Zip Tie Buddy” keeps you work piece clamped tightly, while also providing some separation of the work at the same time.

In this “upload” I am including 1, 2, and 3 line clamps with mounting tabs for 3/16" automotive brake hard line (0.190" or ~5mm). The mounting tab takes a ¼" allen bolt, but a 6mm bolt should also work. Please note that there is one print profile with ALL sizes on individual labelled plates, one plate with all three sizes, and there are also STL files included separately. 

If you check my profile I have already uploaded many other sizes and varieties of “Zip Tie Buddy”, but if you need a custom size or orientation (more clamped items), please ask and I will do my best to accommodate your request.  

If you feel that my work has helped you and you would like to help me back, please feel free to “Buy Me a Coffee”: https://ko-fi.com/crazycaseyscustoms , or it is also highly helpful if you would like to subscribe to my YouTube channel linked in my profile.

Thank you, and happy printing!

Sincerely,

Crazy Casey