Qualco_fpv

cover

20250516_001614.jpg

20250516_001724.jpg

20250516_002346.jpg

20250516_002714.jpg

plate_1.png

20250516_000548.jpg

Immagine 2025-05-15 233655.png

Immagine 2025-05-15 233627.png

Alttezza layer 0.2 mmSupporti ad alberoDoppio infill: Mount 20% - Base 100% per aumentarne la resistenza ed evitare strappi.3 pareti&nbsp;Profilo che utilizzo con Bambulab A1 - TPU Saint-Smart&nbsp;ATTENZIONE! In questo profilo, utilizzato con stampante e tpu come indicato sopra (quindi materiali diversi potrebbero rendere diversa l`esperienza) i supporti sono studiati in modo che la parte supportata venga della qualità migliore possibile, per la rimozione consiglio una buona pinza.&nbsp;Personalmente stampo con una distanza ZD superiore di 0,16 (nero e ciano). Nel caso tu abbia problemi nella rimozione dei supporti, consiglio di alzare la Distanza Z superiore fino a un massimo di 0,2&nbsp;Consiglio di non utilizzare, per stampe relative ai droni, un TPU troppo morbido e deformabile (esempio Overture Rosa).

Layer height 0.2 mmTree supportsDual infill: Mount 20% - Base 100% for increased strength and to prevent tearing3 walls&nbsp;Profile used with Bambulab A1 - Saint-Smart TPU&nbsp;WARNING! In this profile, used with the printer and TPU as indicated above (therefore different materials may yield different results), the supports are designed to ensure the best possible quality of the supported part; for removal, I recommend using good pliers&nbsp;Personally, I print with a Z-lift distance of 0.16 (black and cyan). If you have problems removing the supports, I recommend increasing the top Z-lift distance to a maximum of 0.2&nbsp;I advise against using an overly soft and deformable TPU for drone-related prints (for example, Overture Pink)

universal - 0.2mm layer, 3 walls, 20% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Ho impiegato molte ore e test per realizzare e perfezionare questo progetto per la community FPV freestyle. Se ti piace supportalo con like, fammelo sapere nei commenti e magari posta la foto della tua stampa. Tutte cose che a te non costano niente, ma per me sono importanti. Come il Boost, se lo ritieni valido! 🖤</boostcontent></boostme>Se ti fa piacere, puoi offrirmi un caffè e sostenere il mio lavoro qui 😊----<a target="_blank" rel="noopener noreferrer ugc" href="https://buymeacoffee.com/qualcofpv">buymeacoffee.com/qualcofpv</a>----&nbsp;&nbsp;Mount con attacco UNIVERSALE per DJI Action 2.Pensata e realizzata da me per Bando e Freestyle, che conosco molto bene.&nbsp;_Ingresso per filtro ND TBS&nbsp;_Mount resistente, ideata e modificata per soddisfare ogni mia esigenza, varie accortezze per cercare di evitare il più possibile la rottura dei filtri ND.&nbsp;&nbsp;<h3>_!!! Full FOV no mount in visione in 4:3 Ultrawide e 16:9 Ultrawide, senza sacrificare la protezione !!!</h3><figure class="image image_resized" style="height: auto; width: 403.156px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001420779/design/2025-05-12_668bcede0881b8.jpg"></figure><figure class="image image_resized" style="height: auto; width: 494.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001420779/design/2025-05-12_8f73fe8902a9f8.jpg"></figure>&nbsp;Vuole essere il mio contributo alla community Fpv freestyle, in questo Hobby che come sappiamo è molto dispendioso, con la speranza di salvarvi qualche soldo.&nbsp;Per Feedback non esitate a scrivermi su Instagram qualco_fpv , sono essenziali per migliorare eventuali difetti.&nbsp;È comunque la versione finale risultato di molti test, dovrebbe essere adatta alle esigenze della maggior parte dei piloti freestyle.&nbsp;                                                                                                           !!!!Consiglio VIVAMENTE per una questione strutturale e di resistenza agli impatti forti, per evitare che si possa strappare alla base, di stampare il modello sul fianco, con il lato di ingresso della action cam che poggia sul piatto.&nbsp;Dual infill: Corpo della Mount Giroide 20% - Base 100% for increased strength and to prevent tearing - riempimento concentrico per la base &nbsp;&nbsp;<figure class="image image_resized" style="width: 48.16%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001420779/design/2025-11-24_8afa8ef8ffa908.png"></figure>&nbsp;&nbsp;

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>I spent many hours and tests to create and perfect this project for the FPV freestyle community If you like it, support it with a like, let me know in the comments, and maybe post a photo of your print All these things cost you nothing, but they are important to me Like a Boost, if you think it's worth it! 🖤</boostcontent></boostme>If you like, you can buy me a coffee and support my work here 😊----<a target="_blank" rel="noopener noreferrer ugc" href="https://buymeacoffee.com/qualcofpv">buymeacoffee.com/qualcofpv</a>----&nbsp;&nbsp;Mount with UNIVERSAL attachment for DJI Action 2Designed and created by me for Bando and Freestyle, which I know very well&nbsp;_TBS ND filter slot&nbsp;_Durable mount, designed and modified to meet all my needs, with various precautions to prevent ND filter breakage as much as possible&nbsp;&nbsp;<h3>_!!! Full FOV, no mount visible in 4:3 Ultrawide and 16:9 Ultrawide, without sacrificing protection !!!</h3><figure class="image image_resized" style="height: auto; width: 403.156px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001420779/design/2025-05-12_668bcede0881b8.jpg"></figure><figure class="image image_resized" style="height: auto; width: 494.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001420779/design/2025-05-12_8f73fe8902a9f8.jpg"></figure>&nbsp;This is my contribution to the FPV freestyle community, in this hobby which, as we know, is very expensive, hoping to save you some money&nbsp;For feedback, do not hesitate to write to me on Instagram @qualco_fpv, it is essential for improving any defects&nbsp;It is, however, the final version resulting from many tests, and should be suitable for the needs of most freestyle pilots&nbsp;                                                                                                           !!!!I STRONGLY recommend, for structural integrity and resistance to strong impacts, to prevent tearing at the base, to print the model on its side, with the action cam entry side resting on the build plate&nbsp;Dual infill: Mount body Gyroid 20% - Base 100% for increased strength and to prevent tearing - concentric infill for the base &nbsp;&nbsp;<figure class="image image_resized" style="width: 48.16%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001420779/design/2025-11-24_8afa8ef8ffa908.png"></figure>&nbsp;&nbsp;

Print Profile(1)

Description

_!!! Full FOV, no mount visible in 4:3 Ultrawide and 16:9 Ultrawide, without sacrificing protection !!!

Comment & Rating (13)

License