Bosch Sortimo L-Boxx 102 Insets - Free 3D Print Model

Search models, users, collections, and posts

Fritz025

Tools>Organizers

IP Report

Print Profile(5)

All

P1S

H2D

X1E

P1P

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

1x2 1x3 1x4 Insets

Designer

2.3 h

1 plate

5.0(41)

1x1 Insets

Designer

1.5 h

1 plate

4.9(26)

2x2 Insets

Designer

52 min

1 plate

5.0(20)

2x2 L-Shape Insets

Designer

51 min

1 plate

5.0(10)

Click to see more

Open in Bambu Studio

Boost

328

1270

131

747

411

Released

Description

This is a collection of Inset Boxes for the BOSCH Sortimo L-Boxx 102 in different sizes and shapes. The model is very close to the original insets and fits perfectly into the L-Boxx grid. The insets come with separately printed alignment pegs, so the insets can be printed with No Supports and do not slide around in the L-Boxx.

You can find the side pieces here Bosch Sortimo L-Boxx 102 Insets (Side Pieces).

Comparison with Original

General Print Settings

0.2mm layer height

no supports

3 walls

Insets

Monotonic top and bottom surface pattern

Alignment Pegs

Concentric top and bottom surface pattern

Currently Available Sizes

1x1 (1 compartment)

1x1 (2 compartments)

1x1 (4 compartments)

1x2

1x3

1x4

2x2

2x2 L-Shape

2x3

Assembly

The little alignment pegs have to be glued in.

If you have any requests for different sizes or compartments, please let me know.

Happy Printing!

Comment & Rating (131)

@Dreamteam.2019

Boosted

Print Profile

2x2 Insets

I think the idea with the boxes is great The different models too but it would also be great if there were edge models Because otherwise the middle ones are useless It will be boosted then when the outer ones are also available

(Edited)

The profile uploader has replied

Show original

@Fritz025

Side Pieces are finally here: https://makerworld.com/en/models/1823845-bosch-sortimo-l-boxx-102-insets-side-pieces#profileId-1946922

@Dreamteam.2019

Boosted

Replying to @Fritz025 :

Great, thank you. I have already commissioned. 👍👍👍

@Dreamteam.2019

Boosted

Print Profile

2x2 L-Shape Insets

I think the idea with the boxes is great The different models too but it would also be great if there were edge models because otherwise the middle ones are useless too

Show original

@Dreamteam.2019

Boosted

Print Profile

1x1 Insets

I think the idea with the boxes is great The different models too but it would also be great if there were edge models because otherwise the middle ones are useless too

Show original

@Dreamteam.2019

Boosted

Print Profile

1x2 1x3 1x4 Insets

I think the idea with the boxes is great The different models too but it would also be great if there were edge models because otherwise the middle ones are useless too

The profile uploader has replied

Show original

@Fritz025

I am doing some final test prints right now and hopefully I can get it uploaded by the end of the week.

(Edited)

@Fabrion365

Boosted

Print Profile

1x2 1x3 1x4 Insets

good Design, would be great, if they were better stackable

The profile uploader has replied

@Fritz025

They stack like the orininals. You can find the fitting side pieces here now: https://makerworld.com/en/models/1823845-bosch-sortimo-l-boxx-102-insets-side-pieces#profileId-1946922 Due to the cutout on the side the insets there needed a slightly different design.

@user_1613852920

Print Profile

1x1 Insets

Great models. I've filled a whole L-Boxx

(Edited)

Show original

@ChrisBlack

hi, looks great. your first photo you have the grey sections at the edge. do you have a file for this you would be willing to share?

The designer has replied

@user_3350897844

I think those are originals, no 3d prints. You can see the "embossed" material specs when looking closely...

@Fritz025

Yes sorry I haven't had the time yet to make those as they have different wall dimensions and will have to be split up in two pieces.

@antonioperez20

Replying to @Fritz025 :

Hello, you still don't have these side pieces, do you?

Show original

@lMxrceL

Hello, have you had a chance to design the side parts yet @Fritz025

(Edited)

The designer has replied

Show original

@Fritz025

Side Pieces are finally here: https://makerworld.com/en/models/1823845-bosch-sortimo-l-boxx-102-insets-side-pieces#profileId-1946922

@lMxrceL

Replying to @Fritz025 :

Wow, truly impressive! You're an outstanding designer—your parts fit perfectly and are incredibly well thought out. The side pieces are a brilliant addition, exactly what was missing. Keep up the great work, it's a pleasure to use your creations!

@Fritz025

Replying to @lMxrceL :

❤️

@user_2923378353

Perfect. If you have time soon to create the "grey" side parts, I will download those as well :D PS: And a 2x3 would also be good for long wood screws (in my case)

(Edited)

The designer has replied

Show original

@antonioperez20

Hello, do you know where I can download the gray side pieces

Show original

@Fritz025

2x3 Inset added as profile

@XTC250

Great design, can these be modified so to fit in the 136 L-Boxx in this older style?

The designer has replied

@Fritz025

I believe the 136 L-Box is simply taller but share the same footprint as the 102 L-Box. You might be able to try n scale the insets up in the Z-axis only and they might just fit. Unfortunately I don't have the 136 L-Boxxes so I cant test it but would be interesting to know.

@XTC250

Replying to @Fritz025 :

I will try scaling the boxes up, I think as you say that may work, will give them a go and report back but I can't print till next week...

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.