Kamen Rider Decade Driver
Print Profile(1)
Description
Dear masters, please share optimization suggestions, and brothers who have printed it also mention the problems encountered in the production process and opinions.
This hastily made Rider belt is extremely crude in terms of structure and linkage.
Most of the limiters are made of magnets, requiring 26 5x3mm cylindrical magnets.
The support parts are also very difficult to remove, many parts are not chamfered, please be careful not to get scratched when removing supports.
The gaps between the mating parts are relatively large, and glue may be needed (I only used glue for the final cover and the main body connector).
The card size is 87x57x2.5mm, and the pattern in the middle can be seen through the circular hole as long as it is within a diameter of 34mm.
Further optimization will be continued, and the Rider logo on the front will be added as a priority (I still get a blurry result with a 0.2 nozzle, it may be related to the placement).
Documentation (1)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (10)