Devil_1

Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer

The model measures 127.45 x 200mm
Higher layer heights may be used below the minimum depth of 0.48mm
The maximum depth is 2.2mm, and the actual depth is 1.8mm

Filaments Used:
    Bambu Lab PLA Basic Black Transmission Distance: 0.6
    Bambu Lab PLA Basic Red Transmission Distance: 4
    Bambu Lab PLA Basic Yellow Transmission Distance: 6
    Bambu Lab PLA Basic Jade White Transmission Distance: 5

This print utilizes four distinct filaments

Filament Swap Instructions:
    Begin with Black
    Swap to Red at layer #7 (0.64mm)
    Swap to Yellow at layer #13 (1.12mm)
    Swap to Jade White at layer #15 (1.28mm) and continue

.

.

If you enjoy my work, please show your appreciation with a LIKE and a FOLLOW I would be most grateful