Pet Sematary - Cat Church Tribute

A small tribute to Church from Stephen King's Pet Sematary.

Parts

• Cat
  • Printed with AMS to color the eyes, I used Black/Red PLA, but I think it would be awesome to print the eyes in some glowing green/yellow, I'll try to get some and reprint it;
  • This was printed with Fuzzy skin to give some fur texture;
• Display Base
  • I used in Brown (base + floor), Green (floor/grass), Gray (stones), but you can use any other colors too, or even hand paint it for adding extra details;
• Wooden Plank
  • Brown or Wood PLA
• Wooden Sign
  • Brown or Wood PLA to match the Plank, White for Letters

Assembly

1. Attach the sign to the plank, it should be a tight fit, but you can also add a dab of glue just in case
2. Glue the plank to the base (I made the base hole too wide so it won't be a tight fit and it will need a bit of glue), alternatively you can print the plank & sign slightly bigger to make it tighter and avoid glue;
3. Place the cat on top (you can also glue if you want to keep it there permanently)
4. Have fun (if you can call this fun)

Selling prints?

Grab a commercial license:

Thanks for your support!