Search models, users, collections, and posts
Sunset Hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
2 h
1 plate
Open in Bambu Studio
Boost
10
16
0
0
8
2
Released
Description
Hueforge of a cool image generated by Ai_Collector on civitai, original image: https://civitai.com/images/66172413
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.84x200mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Red
At layer #8 (0.72mm) swap to Yellow
At layer #14 (1.2mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)