Please Be Patient New Driver Plaque Sign Magnet

“Please Be Patient New Driver” Car Plaque/Decor/Sign with Magnets Holes AMS not required

Hi all, welcome to a new episode of “I didn't find what I want exactly so I made my own” series. Today I'm presenting a car plaque/decor that literally says “PLEASE BE PATIENT NEW DRIVER”. AMS is recommended but not required.

You can find the meme car plaque from above here

Main Features

1. The model geometry was designed specifically to reduce AMS usage and filament waste due to filament change. In fact it only changes filament 3 times.
2. Two versions, one with 8mm magnet holes and another with up to 20mm magnets holes, and both are 2mm deep. If your magnets are between 8mm and 20mm, just use the 20mm version and glue the magnets to the insets.
3. Two cutouts near the left and right edges were made to make sure it's easy to take it off the car so it doesn't scratch car paint.

Please note

1. If you are printing it with regular PLA, treat it like a regular plastic sign. That is, it will NOT shine/reflect like highviz stuff.
2. If printed with PLA, please note it is (reportedly) not as weather resistant as PETG or ABS on the outside of the car.
3. AMS is recommended but no required, since you only need to change the filament 3 times. 
4. If your magnets are 8mm exactly (like ones I have), they could be friction fit but I still strongly recommend you glue them to the plaque
5. Using all 6 magnet (especially neodymium ones) holes will make the magnetism VERY strong. If you want to be able to very easily remove it, consider using only 4.