Modular broom holder
Print Profile(2)
Description
I created this broom holder to better organize my utility room, brooms, mops, Swiffers, and other dust and/or cleaning tools all ready for use and within reach, compared to a simple broom holder this one is modular allowing you to print the central part as many times as you want to infinitely increase the number of slots, as set up by me you will have 3 slots for handles approximately 20 mm in diameter and 6 hooks but you can start with two handles and 4 hooks (by not printing the central part) or conversely by increasing the number of central modules you can have the desired number of slots. I recommend using a little glue to permanently join the various components, preventing loosening due to material expansion and/or shrinkage
If you post photos of your combinations I will be happy
Additional material for fastening:
- 2 expansion plugs 6 mm (for masonry fastening)
- 2 screws 4 x 40 with flat countersunk head
- Impact drill
- 6 mm drill bit for drilling the wall
- Glue to join the components
Boost Me (for free)
If you appreciated my work, you can let me know with a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (50)