Search models, users, collections, and posts

Nitrile Glove Dispenser

Rob
Tools>Organizers
IP Report

Print Profile(1)

All
H2D
A1
P1S
X1E
X1
P1P
X1 Carbon
A1 mini
H2D Pro
Nitrile Glove Dispenser
Nitrile Glove Dispenser
Designer
4.2 h
1 plate
4.8(112)
Open in Bambu Studio
Boost
465
1841
166
52
2.4 k
1.7 k
Released 

Description

Boost Me (for free)

Consider boosting if you like this model! It is much appreciated and keeps me going! :)

🧤 Nitrile Glove Dispenser – Maker-Friendly, Support-Free Print

Designed with makers in mind, this Nitrile Glove Dispenser combines form, function, and smart 3D printing techniques.
It’s fully optimized using the 45° rule to avoid supports entirely and features cutouts to reduce material usage without compromising strength giving it an unique pattern.


🛠 Key Features:

  • No Supports Needed – Clean overhangs and sharp angles make for an efficient, hassle-free print.
  • Material Efficient – Lightweight and sturdy design minimizes filament use. Only 75g of filament is needed!
  • Clean Aesthetics – Geometric cutouts provide a modern, technical look perfect for any workshop or lab.
  • Internal dimensions -  70mm depth × 124mm width
  • Compatible with most standard nitrile glove boxes

Perfect for your garage, or workspace.

dispenser
nitrile
nitril
glove
gloves
nitrile glove
wall mount
wall
hexagonal
glove box
holder
organizer
glove dispenser
gloveboxholder

Comment & Rating (166)

(0/1000)
@NCGrimbo
Boosted
Print Profile
Nitrile Glove Dispenser
A tight fit for my box of gloves, but it holds it perfectly. The next one I print will be at 105% to make it slightly less tight.
The profile uploader has replied
profile
3
Reply
@robert.u.s
Looks great! Thanks for review 🙂 Consider following or boosting to support my work 🤩
0
Reply
@Osimb04
Print Profile
Nitrile Glove Dispenser
Nice design and fit my nitrile gloves perfectly. I would have liked to see a design change, with honeycomb all around as my prints do not turn out as well with the looser pattern. Maybe I did something wrong, or something was wrong with my filament
The profile uploader has replied
Show original
profile
1
Reply
@robert.u.s
Thanks for the good feedback 🙂 I might upload a new design with honeycomb if desired 🙂 The design is made to demonstrate that 3D printers can handle large overhangs, while also saving a lot of filament It prints well for me and many others. I recommend you perhaps increase the Layer time for your filament as it appears the filament has not had time to cool down👍
(Edited)
Show original
1
Reply
@KLD.Sweden
Print Profile
Nitrile Glove Dispenser
Very stylish. had to drill a hole because the spacing didn’t work with Jula hardhead (brand in sweden) pegboards, but that’s nothing that can be seen when it’s mounted. Thanks!
The profile uploader has replied
profile
1
Reply
@robert.u.s
Glad you liked it!🤩 i actually have the same Jula pegboards 😂 im from Norway 🙂 Consider following or boosting to support my work 🤩
(Edited)
0
Reply
@user_4211255314
Boosted
Thank you.
The designer has replied
designer
1
Reply
@robert.u.s
Thank for posting and also the boost! its always fun to see my designs come to life 🤩
0
Reply
@584drain
Thank you, I added a disposable mask because there was extra space
The designer has replied
Show original
designer
1
Reply
@robert.u.s
Nice 👍 theres quite a few different sizes on these glove boxes, it was designed to accommodate the largest ones .. 👍🙂 Thanks for posting pictures, consider following or boosting for more models like this 🙂
0
Reply
@KiCkiN
Boosted
Print Profile
Nitrile Glove Dispenser
Just the print I needed. Perfect
The profile uploader has replied
profile
1
Reply
@robert.u.s
Glad you liked it! Consider following or boosting for more models like this. :)
0
Reply
@Faliygonzi
It looks good! I like it!
Show original
0
Reply
@Faliygonzi
I don't know why supports came out! It said they weren't needed
Show original
0
Reply
@Da_Funk
Print Profile
Nitrile Glove Dispenser
Works as intended! In the words of Borat: “Very Nice!” 🥸
1
Reply
@Habmax
Print Profile
Nitrile Glove Dispenser
Support Issue:way to shaky without adding supports
The profile uploader has replied
0
Reply
@robert.u.s
What filament is this? Did you print using my original profile?🙂 looks to me like its going a bit fast there. Try increasing layer time in your filament profile. no such issues have been had by me, using Bambu filament.
0
Reply
@Habmax
Replying to @robert.u.s :
i used your print profile directly from the app and has some basic pla loades. no changes to the printer
(Edited)
profile
1
Reply
@robert.u.s
Replying to @Habmax :
Thanks for clarification, if its not a original Bambu filament, you may need to slow down speed according to that manufacturers specifications. The Bambu PLA Basic profile runs quickly.
0
Reply
@Sound_master
Print Profile
Nitrile Glove Dispenser
The thin bridges become unsightly towards the end Otherwise it fits
The profile uploader has replied
Show original
0
Reply
@robert.u.s
in your case it looks like the layers don't have enough time to cool down. please slow down by increasing layer time in the filament profile. that should fix it for your filament 🙂👍
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bio Egg Dispenser
Bio Egg Dispenser
pymata
10.6 k
4.7 k
Dispenser for Lickable Cat Treats
Dispenser for Lickable Cat Treats
olerym
8.9 k
3.5 k
Dual Battery Dispenser AA & AAA
Dual Battery Dispenser AA & AAA
Matteo C.
13.5 k
2.1 k
Nescafe Gold Coffee Dispenser
Nescafe Gold Coffee Dispenser
Ashwood
9.9 k
5.9 k