Eurorack Cable Clips

This is the second iteration of my 3D printable eurorack cable clip. It's very easy to print and you only need screws (and an allen key) to finally manage your modular rats nest! I've included plenty of variations for different printers (P1S, A1 mini) with different amounts and layer heights.

You'll need M3x10mm machine screws (or M2.5 if your case uses those). I suggest using Button Cap screws, since those leave the most room for cables. Socket head also works. Depending on your case you might even be able to use Befaco Knurlies, but I highly suggest not to, since they waste a lot of space inside the clip.

It's also recommended to use an allen key instead of a screwdriver-bit, the hole in the top allows for easy access. Using something wider (and having to bend open the clip to access the screw) will reduce the clips lifespan.

If you notice clips breaking at the same spot over and over again, please let me know so I can do a revision. Also, feel free to add your own print profiles, or try new filaments. I print in PLA because I'm lazy, PETG might work a little better. 

Thanks to @kashaar and @near_miss.close_call (on Instagram) for the setup-pictures!