Buffy & Angel Hueforge - Buffy the Vampire Slayer
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#545454 PLA Bambu Dark Gray Transmission Distance: 1.4
#bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ff6a13 PLA BambuLab Basic Orange Transmission Distance: 5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Dark Gray
At layer #24 (2mm) swap to Dark Red
At layer #27 (2.24mm) swap to Yellow
At layer #28 (2.32mm) swap to Orange
At layer #30 (2.48mm) swap to Jade White for the rest.
Note: I use Bambu PLA for all of my prints. If you substitute different brand filaments, the result might not look the same due to different filament transmission distances.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)