Star Trek: Strange New World Tricorder

This is the tricorder made by 𝗨𝗻𝗶𝗺𝗮𝘁𝗿𝗶𝘅𝗥𝗲𝗱 from printables→. Original.

I split everything into colors per plate so it should print without AMS. A few of the buttons have multicolor but you can just print those in a base color and paint if you want. 
 

The default slice is 0.16 Optimal because I wanted it nice and wasn't in any hurry. It would still look good at 0.2 except for the front door which needs a variable layer height to print without ugly layer lines. 

Assembles easily and only needs a little glue at the end to hold everything together. Uses 6 5x5mm magnets to hold the hand scanner and the door closed

Assembly instructions from the original page and decals for the displays are in the Assembly Guide section below.

If you want to print the 3 color bars for the door instead of using the decal see this link→. https://www.printables.com/model/1281669-sensor-readings