Search models, users, collections, and posts

FMS FCX10 LC80 Pro Diff Sliders

CKRC Garage / CK Graphics
Hobby & DIY>RC
IP Report

Print Profile(6)

All
P1S
X1 Carbon
A1
X1E
H2D
P1P
A1 mini
X1
H2D Pro
H2S
P2S
H2C
X2D
A2L
PETG Front and Rear 0.2mm layer, 2 walls, 15% infill
PETG Front and Rear 0.2mm layer, 2 walls, 15% infill
Designer
29 min
1 plate
5.0(4)
PLA Front Only 0.2mm layer, 2 walls, 15% infill
PLA Front Only 0.2mm layer, 2 walls, 15% infill
Designer
16 min
1 plate
5.0(1)
PLA Front and Rear 0.2mm layer, 2 walls, 15% infill
PLA Front and Rear 0.2mm layer, 2 walls, 15% infill
Designer
29 min
1 plate
4.0(1)
PETG Front Only 0.2mm layer, 2 walls, 15% infill
PETG Front Only 0.2mm layer, 2 walls, 15% infill
Designer
20 min
1 plate
Click to see more
Open in Bambu Studio
Boost
52
81
11
6
105
60
Released 

Description

Boost Me (for free)

Please consider giving me a boost if this worked out well for you.

On my LC80 Pro they have brass diff locker covers but things like to get hung up on them since it's a solid square contacting the rocks. These attached to the front cover of the locker cover. I used 10mm long m2 bolts but stock 6mm and 8mm will work fine also.

 

If you have an lc80 that is lc80 pro portal axle swapped or a K5 with the brass covers installed these should fit.

 

M2 hardware if needed:

 

https://amzn.to/3GPnk1u

 

 

 

 

Instagram: https://www.instagram.com/ckrcgarage

YouTube: https://www.youtube.com/@CKRC-Garage

 

fms
fcx10
lx80
lc80p
lc80pro
k5
fmsfcx10
fcx10lc80

Comment & Rating (11)

(0/1000)
@RuudKuijer
Fit like gloves. No additional adjustments needed. Just print and slam them on. (luckily I already had longer M2's around). Highly recommended since (as you can see on my photos) the diff locker covers were already hit several times. And this is only from two trips. Printed in PETG-HF, 0.2 strong.
(Edited)
The designer has replied
0
Reply
@RuudKuijer
I cannot rate this design... anyone know what is going on? Previously I could rate... seems not anymore :-(
0
Reply
@ckgraphics
Replying to @RuudKuijer :
I’m not sure, I think you can only rate once, but boost twice on designs.
0
Reply
@Louis2000
I have the normal fcx10 lc80 will they fit just checking ?
The designer has replied
0
Reply
@ckgraphics
No. You need the stock brass cover, this mounts to its little cage.
0
Reply
@user_275232540
Print Profile
PLA Front Only 0.2mm layer, 2 walls, 15% infill
good quality
Show original
0
Reply
@Quberch
Print Profile
PETG Front and Rear 0.2mm layer, 2 walls, 15% infill
Printed with Sunlu ABS and I am very happy with the result. Thank you for your work!
0
Reply
@user_2270023232
Boosted
Print Profile
PETG Front and Rear 0.2mm layer, 2 walls, 15% infill
0
Reply
@Messner
Print Profile
PLA Front and Rear 0.2mm layer, 2 walls, 15% infill
0
Reply
@RuudKuijer
Print Profile
PETG Front and Rear 0.2mm layer, 2 walls, 15% infill
0
Reply
@jmiclat
Print Profile
PETG Front and Rear 0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Sliding Pill Box
Sliding Pill Box
JAM3D | Joel Macário
17.4 k
4.4 k
Box with Lid Mini Slide Box
Box with Lid Mini Slide Box
Industriee
56.1 k
10.2 k
Slide Whistle
Slide Whistle
Stag 3D
32.7 k
7.9 k
Iphone 17 pro
Iphone 17 pro
Cereales
16.6 k
3.6 k